| MX 32x32 DVI-PRO Fully configurable DVI matrix switcher from 8x8 to 32x32 for large applications
MX 32x32 DVI-PRO is a high performance, modular
expandable DVI routing switcher, offering up to 32 inputs
and up to 32 outputs. Each Input and Output board contains
8 DVI connectors, different configurations from 8x8 up to
32x32 are available.
The DVI crosspoint matrix switcher supports all DVI-D
resolutions up to 1920x1200 and 2048x1080. All inputs
are compensated for up to 50m long DVI copper cable,
eliminating the use of DVI repeaters, or cable equalizers.
Cable compensation is done automatically, no adjustment
is needed. Each input is able to emulate any monitor
EDID data from a 100 EDID list - 50 of them are user
programmable.
All outputs of the DVI matrix router are reclocked for stable,
jitter free signal transmission. Each DVI output powers
fiber optic DVI cables on +5V pin, that allows transmission
of DVI signals for long distances. The unit can be
controlled either by RS232 / RS422 port or TCP/IP LAN
connection or by built in website.
Features
 Routing: from 8x8 up to 32x32 single link DVI signals
50 meter DVI cable compensation on all inputs
Field-upgradeable, modular design
Fiber Cable powering on each output
Ethernet control for remote system monitoring and control
Web page hosting capabilities
1920x1200 and 2048x1080 maximal resolutions
Front panel buttons control
Advanced EDID emulator, routing and management - learnes, stores and emulates up to 100 EDID data
RS 232 or RS422 control
TCP/IP LAN control port with built in WEB access
Low noise cooling fans
Advanced power management and error detection
Connectors
| |
8 inputs |
16 inputs |
24 inputs |
32 inputs |
| 8 outputs: |
8x8 |
16x8 |
24x8 |
32x8 |
| 16 outputs |
8x16 |
16x16 |
24x16 |
32x16 |
| 24 outputs |
8x24 |
16x24 |
24x24 |
32x24 |
| 32 outputs |
8x32 |
16x32 |
24x32 |
32x32 |
| LAN |
RJ45 |
|
|
|
| GPIO: |
Phoenix 5 pole |
|
|
|
Available I/O sizes
| Inputs: |
24 pole DVI-D connector |
| Output: |
24 pole DVI-D connector |
| Power: |
IEC Power inlet |
| RS-232 or 422: |
9p sub D female |
| LAN |
RJ45 |
| GPIO: |
Phoenix 5 pole |
Specifications
| Inputs: |
8x DVI-D single link / input board |
| Bit rate: |
1.65 Gbit/s per colour |
| Equalization: |
40dB automatically |
| Resolution: |
640x480 to 1920x1200 and 2048x1080 |
| EDID memory |
50 factory preset, and 50 user programmable |
| RS232 / 422 |
9600 Baud Rx; Tx |
| LAN |
Ethernet 10Base-T or 100Base-TX (Auto-Sensing) |
| Routing: |
32x32 non-blocking - any input(s) to any output(s) |
| Outputs: |
8x DVI-D single link / output board |
| Reclocking: |
Yes |
| +5V current |
500mA / DVI output connector |
| Power: |
100 to 240 V AC or DC 3.0 Amps |
| Dimensions: |
5U rack mount, 221(height) x 440(width) x 302(depth) mm |
| Compliance: |
CE |
| Warranty: |
3 years |
|
 |
|
| Lightware
matrix switchers route signals between multiple sources
and destinations. Our nonblocking architecture allows
to route any source signal to any destination, or
a source
to multiple destinations. User frendly control functions
make them ideal
for rental staging purpose.
I/O compatible boards
|
 |
| MX-DVID-IB and MX-DVID-OB |
| |
 |
| MX-DVII-IB |
| |
 |
| MX-DVI-TP-IB and MX-DVI-TP-OB |
| |
 |
| MX-DVI-OPT-IB and MX-DVI-OPT-OB |
| |
 |
| MX-DVI-OPT-OB-R |
| |
 |
| MX-DVIDL-IB and MX-DVIDL-OB |
|
download
zoom 
connection